Special Design for 10x10mm Reinforcing Mesh - Basalt fiber rebar – Huabin

Product Profile

Basalt fiber rebar is formed by pultrusion technology of fiber impregnated resin. The surface of basalt fiber rebar is thread and coated with quartz sand to increase the friction between basalt fibers rebar and the reinforcing medium.
Depend on different resins impregnation, the basalt fiber rebar is divided into:
1. Epoxy resin base basalt fiber rebar
2. Polyester resin base basalt fiber rebar
3. Vinyl ester resin base basalt fiber rebar
Basalt fiber rebar coated different resin, has different tensile strength and used in different environment.

Product Advantages

Due to its raw material - continuous basalt fiber, thus basalt fiber rebar shows perfect properties:
■ Low weight: only 1/4 of the weight of steel rebar based on same diameter.
■ High tension strength: almost 3 times of the strength of steel rebar based on same diameter.
■ Lower thermal conductivity.
■ Good electrical insulation, non-magnetic, electromagnetic.
■ Resistance to corrosion, rotting and warping.
■ No rust
■ Chemical resistance (potash environment, hydrochloric acid, alkali, sea water and other aggressive environments).
■ Easy handling and transportation.
■ High economic
Basalt fiber rebar can replace steel rebar or carbon fiber rebar in some industrial application and in some special complex environments.

Product Application

Due to its performance, now the basalt fiber rebar is widely used into:
■ Concrete reinforcement.
■ Road reinforcement.
■ Marine engineering.
■ Tunnel engineering.
■ Magnetic resonance imaging rooms for health care
■ Military facilities.

Concrete infrastructural

Bridge

Tunnel

Roads

Concrete construction products

Dyke-dam reinforcement

Product Specification

4mm, 6mm, 8mm, 10mm, 12.7mm, 14mm, 16mm, 18mm, 22mm, 32mm are common and popular size, we accept customized.